Vizio TV Logo Blinking? Here are 4 Tried and Tested Solutions

You may turn your Vizio TV on, but all of a sudden, you notice that the TV’s logo blinks at you and the screen’s light refuses to come on. Pinpointing the reason is difficult, and this is where you get further confused on what to do to fix the issue.

Our technical experts will list some solutions you can try to fix it.

Reasons Behind Blinking Vizio TV Logo

Vizio TV logo blinking is a typical issue that most users experience, whether the user is stuck with the newer or older model. Several people have suggested why the TV logo blinks, but the real reason, most times, is the firmware. If the firmware is corrupt, the logo will flash continually because, during the process, the TV is trying to repair itself. 

Another cause of the blinking is a power surge. If the current flowing through is high, it could offset the circuitry, resulting in a malfunction. This is why the screen’s light refuses to come on, despite the TV being on.

Even low currents can affect the TV’s circuitry sometimes. The good news is you can fix the blinking issue by following the tips our engineers recommend in this post.

4 Tried and Tested Solutions

You may be tempted to take your TV to a repair shop to get the blinking issue fixed once it arises. However, our team recommends you try the following tried and tested solutions before considering the other option.

Fix #1: Do a Hard Reset

Doing this will remove any internal memory clog, malfunctions, and corrupt data. If you are afraid that the reset will clear the settings or erase any downloaded content, rest assured that it won’t. To perform a hard reset;

Switch off your Vizio TV and all plugged devices, detach the TV from the power source, press and hold the power button for about 30 seconds while the TV stays disconnected. After about ten minutes, connect the TV back in and switch it on. 

Fix #2: Check or Unplug Cables and Ports

The cables and the port could be the cause of your TV’s logo flashing. They may not be working correctly or damaged. So, you should either try another cable, repair the port if damaged, or plug the cable into another port.

It’s difficult to know if a cable is damaged, so our team advises that you try using another wire if it’s HDMI. This is one way to determine if the initial one was faulty. You should use the 2.0 version and above, as it allows for the passage of more information.

Fix #3: Check for Firmware Updates

As our technical professionals mentioned, the firmware is the main factor responsible for the blinking aside from the power surge. Most times, the TV updates automatically when there’s a new firmware update available [1]. But, the TV may refuse to do this despite the availability of a recent one.

You can update it manually, but you should check if there are any available. To do this, select ‘Menu,’ scroll to ‘System’ and click, and press ‘Check for Updates.’ If there’s an available update, you will be asked if you want to install it. 

Fix #4: Do a Factory Reset

Unlike a hard reset, the factory reset will delete all saved settings and downloaded content on your TV. So, unless the first option doesn’t work, you shouldn’t try the factory reset if you want to save your downloaded content. You must have exhausted all options before doing this. 

To perform a factory reset: select ‘Menu’ on the remote, scroll to system and press, navigate to reset and admin, and press ‘Reset TV to Factory Defaults.’ Input your TV’s passcode, select ‘Reset,’ and wait for your TV to factory reset. This will take less than ten to fifteen seconds. 

Tips and Reminders

When the TV’s logo starts flashing and the visuals aren’t coming on, you shouldn’t panic. Switch off the TV and disconnect it from the power source alongside other connected devices. Don’t try doing anything that involves loosening the TV’s components, as you can complicate the situation.

If, after trying the steps outlined here and your TV’s logo continues to flash, reach out to a professional. The issue could be beyond what you think it is. 

FAQ

What does it mean when the Vizio logo blinks?

When the Vizio logo blinks, it means that the firmware is corrupt or there’s a power surge. This will eventually cause the TV’s visuals not to come on. 

Conclusion

Vizio TV logo blinking is a common issue that you can fix if you follow the instructions our team of engineers has explained here. So, you don’t have to spend taking your TV for a professional repair. However, you should contact an expert for help if the issue persists after trying all the solutions recommended in this post. 

The post Vizio TV Logo Blinking? Here are 4 Tried and Tested Solutions appeared first on The Product Analyst.

from The Product Analyst https://theproductanalyst.com/vizio-tv-blinking-logo/