How to Pair iHome Bluetooth Speakers with Different Devices

Most iHome products are designed to automatically be compatible with other Apple products. But some many not be aware that they also work well with Android and Windows. 

As long as your device has Bluetooth, it’s a breeze to pair these devices up. Here’s a guide on how to pair iHome Bluetooth speakers depending on your device.

Prepare the Device

Before you attempt to connect your iHome speakers to your device, make sure it’s fully charged. Connect and charge it with its USB charging cable. Plug it in a USB power source (it can be a USB port of a computer or a USB charging adapter).

It takes around 4-6 hours for the iHome Bluetooth speaker to be fully charged. The charging indicator light should stop flashing when it’s done.

Put iHome Speakers into Pairing Mode

To successfully pair your preferred device to an iHome speaker, you will need to turn on the speaker. Hold down on the power button until a sound is produced.

Turn the iHome speaker to Bluetooth mode by sliding the switch from “aux” to “Bluetooth.” This switch can be found on the speaker’s bottom panel.

Press the “Play, Pause, Pairing” button of your iHome speaker to get it in pairing mode. This is the far right button on the top panel. There should be a double-beep and an amber light flashing in front of the speaker.

Android Device

Make sure the speaker and the Android device are in close proximity, not farther than 30 feet.

• Next, turn on the Bluetooth settings of your Android device. Go to Settings and find “Bluetooth.” Turn on your Bluetooth settings and select “Pair new device.”
• The iHome speaker should now appear on your Android device, once recognized by your Android device, select it to pair. If asked for a password, enter 1234.

When the two devices are connected, the amber light on your iHome speaker should stop flashing.

Apple Device

Make sure the speaker and the Apple device are in close proximity, not farther than 30 feet.

• Go to settings and select “Bluetooth,” and turn on your Bluetooth settings.
• A list of devices should appear on your Apple device. Look for your iHome speaker and select it to pair.
• If it’s not showing, you can find it under “Other Devices.” Just tap on it to connect your device. If asked for a password, enter 1234. When the two devices are connected, the amber light on your iHome speaker should stop flashing.

Windows Computer

Make sure the speaker and the Windows computer are in close proximity, within at least 30 feet.

• First, open up your system settings and select “Bluetooth and other devices.” You can do this by clicking the Bluetooth icon in the toolbar and then select “Show bluetooth devices.”
• A window should come up with “Add a device” displayed.Find the iHome speaker in the list from your Windows computer and tap on it to connect. If asked for a password, enter 1234.
• When the two devices are connected, the amber light on your iHome speaker should stop flashing.

If you can’t find the Bluetooth icon, click the upward arrow on the bottom task bar and you’ll find it there. You can also use your Windows search box and search for “Bluetooth.” This will prompt the bluetooth settings window to appear.

Pairing Confirmation

The iHome speaker should indicate it is paired with a voice announcement. A green light should also be displayed on the front.

Your device should also indicate it is paired.

• For Android and Apple devices, there should be a small icon on the status bar, either on the upper right or upper left to indicate the device is connected.
• For Windows, it should show when you hover the mouse pointer over the Bluetooth icon or when you click it.

There you go, you can now use the iHome speaker to play music and other audio.

Troubleshooting

If you followed all the steps above but failed to pair, try the following options:

• Double check if the bluetooth of both devices are turned on and repeat the above process.
• Try resetting your device and the speaker then repeat the steps above. 
• Make sure two devices are close to one another and are fully-charged.
• Turn on your mobile device’s bluetooth before placing your iHome speaker in pairing mode. (It might be connected to another Bluetooth device)

Conclusion

As seen on this how to pair iHome Bluetooth speakers guide, the process is easy and straightforward. Remember that Apple, Android, and Windows devices are all compatible with the speaker as long as they have Bluetooth technology [1]. Just follow the above steps carefully and you’re sure to successfully pair your preferred device to the speaker.

The post How to Pair iHome Bluetooth Speakers with Different Devices appeared first on The Product Analyst.

from The Product Analyst https://theproductanalyst.com/how-to-pair-ihome-bluetooth-speakers/